|
تفاصيل المنتج:
|
| معيار المواد: | إسو 10474-3.1.ب، جيس جي 0415-3.1.ب | عمق: | 100 ميكرومتر |
|---|---|---|---|
| القيمة المستهدفة للعرض: | 0.5 ميكرومتر | معيار الاختبار: | ISO 3452-3:1998(E)، جب/T6064 |
| إبراز: | YM-B3 penetrant testing reference block,NDT sample block 100μm crack depth,non-destructive testing equipment with warranty,NDT sample block 100μm crack depth,non-destructive testing equipment with warranty |
||
YM-B3 Penetrant Testing Reference Block 100μm Crack Depth NDT Sample
All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled
| Material standard | according to ISO 10474-3.1.B,JIS G 0415-3.1.B |
| Depth | 100µm |
| Width target value | 0.5µm |
| Test standard | ISO 3452-3:1998(E),JB/T6064 |
اتصل شخص: Ms. Shifen Yuan
الهاتف :: 8610 82921131,8618610328618
الفاكس: 86-10-82916893
Arabic
